MOTORFÄSTE UNDRE VÄNSTER SPECIAL

Designed as an almost mandatory addition to any Mini with a rod change transmission, extra stabilizers will greatly aid any car. In standard form the engine control is left to the upper stabilizer. This often results in not only significant movement but even a cracking and breaking of the bracket that is welded to the bulkhead.

This kit fits on the left side and connects to the lower front gearbox case studs/bolts and goes rearward to bolt on the rear leg of the subframe, where one hole will be required.

The bushes used are the stock bushes as used in the stock upper stabilizer. Kits are made for both the right or left side of the tranny; either or both can be used. (See MSSK which fits to the lower clutch casing/flywheel case studs and then goes rearward to bolt on the rear leg of the subframe, where one hole will be required.)