styrsnäcka för servostyrning Ford Mustang 1967-1970

Power steering conversion box for 1967-1970 Ford Mustangs with 1-1/8" sector shaft. Modern integral power steering conversion box with a quick 14:1 quick ratio and firm modern feel. Steering column modifications required for installation, see product instructions for more info.

NOTE: 1967 Used 1" & 1-1/8" pitman shafts measure first!

NOTE: This box fits 60-65 Falcons with 1-1/8" Sector Shaft.

800111 SPECIFICATIONS:

800111 Installation Drawing

Input Shaft: 11/16"-36 Spline

Pitman Shaft: 1-1/8" Ford with 32 Splines and 4 Master Splines

Pressure Port: 16mm X 1.5 Flare (Located closest to engine)

Return Port: 16mm X 1.5 Flare (Located closest to input shaft)

Maximum Pressure: 1450 PSI Maximum Operating Pressure, 1100-1250 Optimal

Flow Rate: 2.0-2.5 GPM Flow Rate Recommended

1968-70 Mustangs will need the factory column collapsed 1-2 in. for clearance. Cars with factory power steering will require either a drag link adapter or a manual steering center link