- Articulation is amazing with this kit. You will easily use the complete travel your shock absorbers allow. For the maximum shock length, choose the DT8000's and add some bar pin eliminators in the front of your ZJ!
- Capability versus stock is unbelievable. Not only are you 7" + tire size higher off the ground, but you have a suspension designed to conform to boulder strewn trails. Keeping your tires on the ground always equates to more traction, even without lockers. Traction is the key to off road capability, and you'll have a ton with this suspension.
- Clearance is important in so many ways, we sometimes forget what it does for us. We're not just talking about the extra 7" the new coils will give you, but the other clearance sensitive parts too. The front long arms are designed to fit without tire interference up to 37"+ (tested thoroughly with 37x12.5x17 Goodyear MT/R tires on 17x8 wheels with 4" backspacing on 7" lift). That means you can turn lock to lock in any suspension position without fear that your tires will rub on the control arms. Didn't think that was possible with 37's, did you? The front subframe gains roughly 2" of ground clearance over the factory transmission crossmember!! A better breakover angle results and greatly reduces the possibility of high-centering. The front long arms are mounted as high as possible in the subframe so they are also super high clearance. NOTE: 37" tires requires major fender trimming. Our tests were to conclusively prove that 37" tires will clear the control arms when turning. We recommend 35" tires with this suspension kit (with trimming).
- Streetability is always important to our design process. This suspension had to feel and perform immaculately on the street before we gave it our stamp of approval. Even at 7" of lift you'll be completely impressed with the ride as you're cruising the interstate at 70 mph.
- Durability makes this kit shine. Every part we manufacture is strong enough to hold up to anything you put in front of it. We use high quality thick wall D.O.M. and cold rolled solid steel for our control arms and track bars. All our subframe and bracket material is precision laser cut and formed from 1/4" steel plate. Needless to say, it's built to withstand a lifetime of abuse. We guarantee it.
That pretty much sums it up. This is the one off the shelf kit that will offer you all of these things and more in one complete package. Try to find another kit that will give you even close to the same overall performance. Seriously compare this kit to anything else out there.
PDF
