CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts

Fits 2-Door 07-11 models only; Recommended on models with 3.5-6-inches of short arm lift or 2.5-6-inches of long arm lift

This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5-6-inch short arm suspension lifts or 2.5-6-inch long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. Tom Woods designed this to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing. Rough Country's CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts - 5097.1

Extended CV drive shaft, flanges/yokes, and hardware