12,000-Lb Winch Recovery System with Steel Cable

See Description for additional technical information

You'll never see a mud hole the same way again! Our high-powered, high-quality recovery solutions are durable, strong, and sure to come in handy when the situation gets a little murky. Each unit features Series Wound motors which are extremely efficient at higher speeds and less prone to overheating compared to Permanent Magnet motors. Speeds range from 5.5-HP on 9,500-Lb capacity units to a staggering 6-HP on 12,000-Lb units. Better still, Rough Country Recovery Systems utilize a 3-stage planetary gear train boasting a 265:1 gear ratio; allowing enormous torque in such a small housing. All winches include a free wireless remote for easy operation, and a replaceable Clevis hook for convenience. Tips For Safe Winch Operation:

• Always take your time when winching, do not rush to engage or disengage the winch or position the cable
• Make sure you fully engage or disengage the winch to prevent damage to the winch
• Remember the winch controller may have to be used to loosen the winch to allow the engage or disengage lever to be moved - Never force the lever as damage can occur
• Always be sure of your hook mounting point
• Always lay something over the cable if using a steel cable model winch to dampen the cable in case of cable failure
• Clear the area of any and all persons and vehicles

Winch Details:
Rated Line Pull: 12,000-Lbs (5440-Kgs)
Gear Train: 3 Stage Planetary
Gear Reduction Ratio: 265:1
Motor: Series Wound 6-HP 4.5-Kw
Cable: 3/8-inch-by-94-foot steel
Clutch: Sliding Ring Gear
Braking Action: Automatic In-The-Drum
Drum Size (Diameter/Length): 2.52-inches/8.82-inches
Bolt Pattern: 4 Bolt Pattern, 4.5-by-10-inches
Overall Dimensions (L-by-W-by-H): 21.3-by-6.3-by-8.6-inches Rough Country's 12,000-Lb Winch Recovery System with Steel Cable - RS12000

Winch, roller fairlead, wired controller, wireless controller, Clevis hook, and all necessary wiring and hardware